R&L Electronics

Text Questions to
513-868-6399

800-221-7735

Catalog » Radios » HF VHF BASE » FTDX101D	My Account \| Cart Contents \| Checkout

Amplifiers
Preamps
440 MHZ 144 MHZ 50 MHZ HF VHF/UHF MISC
Antennas

440 MHZ MOBILE 220 MHZ MOBILE 144 MHZ MOBILE 50 MHZ MOBILE 28 MHZ MOBILE 24 MHZ MOBILE 21 MHZ MOBILE 18 MHZ MOBILE 14 MHZ MOBILE 10 MHZ MOBILE 7 MHZ MOBILE 3.5 MHZ MOBILE MULTI BAND VHF/UHF MOBILE MULTI BAND HF MOBILE MULTI BAND HF/VHF/UHF MOBILE MULTI BAND HF/VHF MOBILE 440 MHZ BASE 220 MHZ BASE 144 MHZ BASE 50 MHZ BASE 28 MHZ BASE MULTI BAND VHF/UHF BASE MULTI BAND HF BASE MULTI BAND VHF/UHF/HF BASE MULTI BAND VHF/HF BASE MULTI BAND VHF/HF MOBILE MULTI BAND VHF/HF PORTABLE 220 MHZ PORTABLE 144 MHZ PORTABLE MULTI BAND VHF/UHF PORTABLE MULTI BAND HF PORTABLE MULTI BAND HF/VHF PORTABLE MULTI BAND VHF/UHF/HF PORTABLE CB ANTENNAS ANTENNA ADD ONS RECEIVE ONLY ANTENNAS DUMMY LOAD BALUN/CENTER INS RADIAL KITS MISC
Antenna
Accessory
DUPLEXER TRIPLEXER ROTATORS MISC
Antenna
Mounts
MAGNET TRUNK LIP THRU HOLE GUTTER BUMPER THRU GLASS CLIP OVER WINDOW LUGGAGE RACK MIRROR MISC
Antenna
Tuners
UHF MANUAL VHF MANUAL HF MANUAL HF AUTOMATIC MISC
Books

STUDY TYPE Nifty Manuals MISC
Cable
Coax
RG58 MINI 8 MINI 8 W/CONNECTORS RG8 RG8 W/CONNECTORS RG59 RG59 W/CONNECTORS LADDERLINE/TWIN LEAD ROTATOR CABLE GROUND WIRE RG213 RG213 W/CONNECTORS RG316 W/CONNECTORS RG316 HT JUMPERS MISC
Connectors

CONNECTOR END POWER POLE ADAPTER MISC
Power
Supplies
LINEAR <15 AMPS (TRANSFORMER TYPE) LINEAR 15-40 AMPS (TRANSFORMER TYPE) LINEAR >40 AMPS (TRANSFORMER TYPE) SWITCHING <15 AMPS SWITCHING 15-40 AMPS SWITCHING >40 AMPS WALL CUBE INVERTER MISC
Radios

440 MHZ HT 220 MHZ HT 144 MHZ HT 440 MHZ MOBILE 220 MHZ MOBILE 144 MHZ MOBILE 144/440 DUAL BAND MOBILE 28/50/144/440 QUADBAND MOBILE HF/50/144/440 MOBILE HF/VHF MOBILE HF MOBILE 144/220 DUAL BAND HT 144/440 DUAL BAND HT 144/220/440 TRI BAND HT 50/144/440 TRI BAND HT 144 MHZ BASE 50 MHZ BASE 28 MHZ BASE HF BASE HF/VHF BASE HF/VHF/UHF BASE VHF/UHF BASE SCANNER RECEIVER SHORTWAVE BASE WEATHER RADIO RECEIVER SHORTWAVE HANDHELD/PORTABLE REPEATERS AM MOBILE CB SSB MOBILE CB AM BASE CB SSB BASE CB HANDHELD CB KIT MISC
Radio
Accessory
Bandpass Filter Battery Cables Cases Charger Clock (Atomic) Clock (GMT Atomic) Clock (Statndard) Coax Switch DC Power Strip DTMF Unit External Speaker Filter Headsets Key/Keyers Kits Lightning Arrestors Low Pass Filters Mics and Speaker Mics Misc Mounts for Radios Software SWR Analyzers TCXO TNC/Sound Card Interfaces Tone Unit Voice Synthesizer Wattmeters
Tower

20G AND ACCESSORIES 25G AND ACCESSORIES 45G AND ACCESSORIES BX TOWER AND ACCESSORIES 55G AND ACCESSORIES MAST PIPE AMERICAN TOWER AMERITE 20/25 & ACCESSORIES AMERICAN TOWER AMERITE 45 & ACCESSOREIS AMERICAN TOWER AMERITE 55 & ACCESSOREIS AMERICAN TOWER GCS COMMUNICATIONS TOWER AMERICAN TOWER SPECIAL COMMUNICATIONS TOWER MISC

Brand

Email
Subscribe to our email list
Unsubscribe to our email list

Catalog

Request Catalog
Download eCatalog

Store Info

FAQ
Map to Store
Special Events
Store Hours

FTDX-101D YAESU FTDX101D
[FTDX101D]

Name: Yaesu FTDX101D HIGH CLASS HF/50MHZ
Brand: Yaesu
Price: 3,199.95 USD
Availability: OutofStock

$3,199.95
$500.00 coupon has been applied to the above price.
Coupon is valid through 12/03/24
If in Ohio, tax is applied to $3699.95
Free Shipping on FTDX101D
Free shipping to USA Only

Click to enlarge

HIGH CLASS HF/50MHZ

This is a special order item. We do not normally stock it. We will order it for you.

View the brochure for FTDX101DView the manual for FTDX101D
The Ultimate

HF/50MHz transceiver

FTDX101D 100W

We believe that hearing a weak target signal in an environment of close strong interference is the most important feat required of HF DX communications equipment in every era. Raising and meeting the goal is the ultimate mission that Yaesu
has challenged for over 60 years.

True Performance

Hybrid SDRs (Narrow Band SDR & Direct Sampling SDR)

2kHz RMDR 123dB+

2kHz BDR 150dB+

2kHz 3rd IMDR 110dB+

400MHz HRDDS (High Resolution Direct Digital Synthesizer)

2kHz Phase Noise -150dBc/Hz

VC-TUNE (Variable Capacitor Tune) signal peaking

3DSS (3-Dimensional Spectrum Stream) visual display

Narrow band SDR & Direct Sampling SDR

Emphasizes Basic Performance and Hybrid SDR Functionality

Includes Digital Processing Generated Real-Time Spectrum Scope

FEATURES

Hybrid SDR Configuration

In addition to the Narrow band SDR receiver, that boasts overwhelming Basic Performance, the Hybrid Configuration Digital Processing with Direct Sampling SDR permits inclusion of the superb Real-Time Spectrum Scope. *300Hz and 1.2kHz
roofing filters (Optional)

Narrow band SDR

Crystal Roofing Filters produce phenomenal Multi-signal characteristics

The Down Conversion type receiver construction is similar to the FTDX5000. The first IF frequency is 9 MHz, and a low noise figure dual gate MOS FET, D-quad DBM (Double Balanced Mixer) with excellent intermodulation characteristics, is
implemented in the mixer section. Narrow band SDR configuration makes it possible to use the narrow bandwidth crystal roofing filters that have the sharp shape factor. This achieves the amazing multi-signal receiving performance when
confronted with the most challenging on-the-air interference situations.

In addition to IF down-conversion, The FTDX101 receivers implement the YAESU legendary powerful RF Front-Ends, outstanding low-noise Local Oscillators, roofing filters with sharp shape factors, and the latest circuit configurations that we
carefully selected for all circuit elements. Consequently, the proximity BDR (Blocking Dynamic Range) in the 14 MHz band reaches 150 dB or more, the RMDR (Reciprocal Mixing Dynamic range) reaches 123 dB or more, and the 3rd IMDR (third-
order Intermodulation Dynamic Range) reaches 110 dB or more.

Narrow band SDR + Direct Sampling SDR

Emphasizes Excellent Receiver Performance and Hybrid SDR Functionality

Digital Processing Generated Real-Time Spectrum Scope

The Narrow band SDR receiver removes strong out of band signals by using a superheterodyne method, with narrow band roofing filters which significantly attenuates unwanted out of band frequency components, and the wanted signals within the
passband are converted to digital by a high resolution 18-bit A/D converter and sent to an FPGA (Field Programmable Gate Array) for signal processing.

The FT DX 101 series uses a hybrid SDR configuration that integrates a direct sampling SDR receiver in order to view the entire band status in real time, with the excellent dynamic receiver performance achieved by the narrow band SDR
receiver circuit.

By using this hybrid SDR design, the overall performance of the entire FTDX101 receiver system is improved. The Direct Sampling SDR driving the real time Spectrum display with its large dynamic range enables the weakest signal to be
observed on the display when it appears and the Narrow Band SDR enables that signal to be selected, filtered and then decoded.

If there is powerful AM station near your location or in challenging operating situations where there are a lot of strong signals in the band from Contests, DX-pedition activities, those signals outside the pass band can be attenuated by
the very effective roofing filter in the front stage of the A/D converter. This reduces the signal load on the A/D converter which is a bottleneck from the viewpoint of the entire receiving circuit. Therefore, interference is reduced making
it is possible to continue to operate even under such difficult conditions.

Truly Quiet and Clear Reception

Ultra Low-Noise Local Oscillator System; 400MHz HRDDS (High Resolution Direct Digital Synthesizer)

The C/N ratio (signal-to-noise ratio) of the local signal injected into the 1st mixer is an important factor in improving the proximity multi-signal characteristics. The local circuit of the FTDX101 series uses the 400 MHz HRDDS (High
Resolution Direct Digital Synthesizer) method that was used in the FTDX5000. This circuit configuration is different from a generic PLL that generates a local signal. Creating the local signal by directly dividing the high frequency of 400
MHz, the theoretical PLL lockup time becomes zero, and C/N deterioration by the lockup time does not occur.

The significant improvement of the C/N characteristic by directly dividing the frequency contributes dramatically to reduce the noise in the entire receiver stage, and also improve the BDR (Blocking Dynamic Range) characteristic in strong
signals proximity.

In the FTDX 101 series, in addition to the adoption of the 400 MHz HRDDS, the latest circuit configurations that reduced noise, and carefully selected components are used. As a result, the phase noise characteristic of the local signal
achieves an excellent value of -150 dBc/Hz or less at 2kHz separation.

This low-noise, high-quality local signal contributes significantly to the multi-signal and the ultra-close signal proximity (such as a few hundred hertz) characteristics.

Unparalleled -70 dB Maximum Attenuation VC-Tune

Newly developed VC-Tune RF Preselector with high precision stepping motor drive provides outstanding attenuation characteristics

Frequency automatic adjustment RF Preselector VC-Tune

In the FTDX101 series, a next-generation RF preselector VC-Tune further improves the high-performance RF æ (mu)-Tuning system adopted in FTDX9000. Using a remarkable miniaturization design while producing unparalleled characteristics and
maximum attenuation of -70 dB.

Newly developed VC-tune circuit drives a variable capacitor (VC) with a high precision stepping motor and achieved remarkable miniaturization over æ-tuning system.

VC-Tune has no annoying steps or switching relays by continuously covering the band with a variable capacitor driven by a high-precision stepping motor following the frequency. The conventional preset method of switching coils and
capacitors with relays is eliminated.

When there are multiple strong signals in the band, press the "VC TUNE" key and turn the MPVD (Multi-Purpose VFO Outer Dial) ring on the VFO dial to activate the high-precision stepping motor to adjust the variable capacitor. Fine tune to
the optimum point that attenuates the strong signal in the band while operating the VFO dial.

VC-Tune stores the last tuning point for each band, so when broadcast-like signals are periodically transmitted on the same frequency, that frequency can always be attenuated by setting the VC-Tune once.

The Highest Transmit Signal Purity

High-Quality transmission with outstanding phase noise characteristics

Transmit Final Stage produces the Highest Signal Purity

The excellent C/N characteristics provided by the 400MHz HRDDS (High Resolution Direct Digital Synthesizer) used in the local oscillator circuit also contributes significantly to the transmitter section. In a generic circuit, noise or
distortion may occur depending on the circuit configuration and the components, up to the final stage that is producing the transmit signal, even if the local signal is of high quality. In the FTDX101, a thorough examination of each
element up to the final TX stage was made. The clock that divides and distributes the local signal from the 400MHz HRDDS circuit to each block, as well as the FPGA, D/A converter, the final power amplifier etc., and carefully selecting the
latest circuit configurations to improve the C/N characteristics of the entire transmitter block. The transmit signal of the FTDX101 is directly generated from a 16-bit D/A converter without passing through a mixer circuit, therefore
distortion and noise are significantly suppressed.

As a result, high-quality local signal characteristics are maintained without degradation to the final stage, and the transmission phase noise characteristics achieve -150 dBc/Hz at 2kHz separation. FTDX101 transceiver user will appreciate
the finest performance with a high-purity transmission signal.

New Generation Scope Display 3DSS

Intuitively grasp changes in the strength of the signals

Newly developed 3DSS (3-Dimentional Spectrum Stream) system

in addition to a conventional Waterfall display

7-inch TFT Color Touch Panel Display

Size: 7-inch Wide

Resolution: 800 x 480 pixels

ABI (Active Band Indicator) & MPVD (Multi-Purpose VFO Outer Dial)

Deliver Superior Operability and Visibility plus Introduce Numerous Functions

Front Panel Design Emphasizes Solid Superior Touch and Operability

Primary important operation functions such as the Main VFO dial, VC-TUNE, WIDTH/SHIFT are arranged near the center of the pane for easy access.

Band select keys are placed as a row of ABI (active band indicator) at the top of the VFO dial, with your operating efficiency and comfort.

Even with a Large 7-inch Touch Panel Display, the panel layout emphasizes quick visibility and operability as a First Priority.

ABI (Active Band Indicator)

ABI is arranged as the band select key in the horizontal a row at the top of VFO dial.

When the band selected as MAIN Band, the LED indicates in white, and when the band selected by SUB band, the LED indicates in blue. At the status of transmission, the LED turns red so you can instantly confirm which VFO is transmitting.

In addition, since the orange LED lights up when you press and hold the band key, you can use it to display a band that has an antenna connected or to display a band operated in DX-pedition mode as a memo. Below the band key is a key for
selection between transmission and reception of the MAIN and SUB band, and below that, there is a switching key for using the VFO knob on the MAIN or SUB tuning, so, even when the operating split using both MAIN and SUB bands at the same
time, the band control can be performed smoothly, and so tuning the wrong band by mistake is reduced.

MPVD (Multi-Purpose VFO Outer Dial)

The MPVD is a large high-grade aluminium multifunctional ring around the outside of the VFO dial. The ring allows control of SUB VFO frequency dial, VC-TUNE, Clarifier and C/S (custom select function). The MPVD is a handy dial that allows
you to adjust important functions in ever-changing HF communications without taking your hand off the VFO. The ring has the traditional Yaesu outstanding smooth and solid feeling when used.

PC Remote Control Software to Expand the Operating Range

Even from a distance, Dual Band-Scope Available Comfortable Operation utilizing the advantage of Hybrid SDR

Remote operation connected to LAN or Internet

PC control software performed remote operation of the transceiver from a remote location via the LAN or the Internet is available. (Requires optional external LAN unit)

In remote operation, in addition to the transceiver basic operation, it is compatible with DUAL-BAND scope and versatile displays, enabling comfortable operation. Also, you can enjoy various usages such as monitoring the band condition on a
large display at a place away from the shack by connecting to a home LAN.

By communicating of Transmit/receive voice, RF scope, AF scope and CAT command to the transceiver, band status monitor by scope display, various filter settings, interference reduction function etc., can be easily set from PC, and possible
to perform comfortable communication.

Optional Accessories

YAESU CT178	QUADRA CONTROL CABLE	$ 74.95	Buy CT178
AMERITRON DBDB15Y	ALS-1306/RCS-12 to YAESU FT-DX3000D DB15	$ 37.95	Buy DBDB15Y
NIFTY DXINGTUTORIA	GUIDE TO ADVENTURES IN DXING	$ 17.95	Buy DXINGTUTORIA
YAESU FC40	AUTOMATIC ANTENNA TUNER FOR LONG WIRE ANTENNAS	$ 304.95	Buy FC40
YAESU FH2	REMOTE CONTROL KEYBOARD	$ 89.89	Buy FH2
YAESU M1	REFERENCE MICROPHONE	$ 679.95	Buy M1
YAESU M100	DUAL ELEMENT MICROPHONE	$ 409.95	Buy M100
MMBANDPASS	HF/VHF/UHF Bands Operating Guide	TBA
NIFTY MMFTDX101D	NIFTY GUIDE	$ 24.95	Buy MMFTDX101D
NIFTY MMRADIOMG	RADIO MONITORING GUIDE	$ 18.95	Buy MMRADIOMG
AMERITRON PNPDB15Y	CABLE ARB704 to FT-DX3000/DX101	$ 28.95	Buy PNPDB15Y
AMERITRON RJDB15Y	ARI-500 to YAESU FT-DX3000 INTERFACE CABLE	$ 36.95	Buy RJDB15Y
YAESU SCULAN10	NETWORK REMOTE CONTROL SYSTEM	$ 269.95	Buy SCULAN10
YAESU SP101	DESKTOP EXTERNAL SPEAKER	$ 199.95	Buy SP101
YAESU SSM75G	SPEAKER MICROPHONE (SAME AS SUPPLIED)	$ 54.95	Buy SSM75G
YAESU VCT101	VC-TUNE UNIT	$ 299.95	Buy VCT101
YAESU XF128CN	9 MHZ/300 HZ CW FILTER MAIN BAND	$ 199.95	Buy XF128CN
YAESU XF128SN	9 MHZ 1.2KC SSB FILTER MAIN BAND	$ 199.95	Buy XF128SN
YAESU XF129CN	8.9 MHZ 300 HZ CW FILTER SUB BAND	$ 199.95	Buy XF129CN
YAESU XF129SN	8.9 MHZ 1.2 SSB FILTER SUB BAND	$ 199.95	Buy XF129SN
YAESU YH77STA	LIGHTWEIGHT HEADPHONE	$ 89.95	Buy YH77STA